Downtown Property Services
This was in the RiNo district of Denver. The slab was over 100 years old we had to bring in some heavy equipment to get the previous overlayment to get down to the bare concrete we then sealed.
Residential Exterior Patio
This client didn’t enjoy spending time on his patio because of all of the unsightly oil stains. They hired us to fix it, and we saw that they had moisture in their slab, so we put out a moisture tolerant primer followed by a gray coat of epoxy and top coated with a poly spatic. It now looks like new and they are able to enjoy being out on their patio again!
Mammoth American Tattoo Shop
We had to do some hard work turn this floor around at this tattoo shop. It was built in 1901, and it was an original slab, so there was a lot of oil exposure that had happened over the years. We grounded down the concrete put in oil tolerate primer, and the results are beautiful!
Rocky Mountain Fire Station
Rocky Mountain fire station had hired a pervious contractor to do their floors, but after just six months it was starting to peel up. We were hired to come in and grind down the existing floor surface and polish the concrete floor to make it new again.
The store hadn’t had their floor replaced since the early 1970s. We were able to engineer a system that went over their existing VCT flooring tiles. The system we created was an epoxy base into which we incorporated sand. It was designed to hold up to the heavy use a lumber yard and retail store experiences daily – think fork lifts, palette jacks, and constant foot traffic.
Trifecta Medical originally had us come in to stain some of their offices. But, when we got there the owner showed us the state of his warehouse. The previous contractors had done a shoddy job. They’d left track marks all over the floor and hadn’t delivered the final system the owner wanted. We came cleaned, prepped, and densified the floor to make it stronger and more visually appealing.
BMC West wanted to update their break room. They had older tile that was dirty, dingy, and out of style. We worked with the client to do a sample board and hone in on the look they really wanted. After they approved the flooring system, we were able to come in and rip out their old tile, prep the floor, and lay the coating down – all around their business schedule.
CoorsTek wanted to bury the old railroad tracks (dating to the 1880s) that used to bring in materials for the kiln so that they can make a museum. We were able to come in and give them a monolithic floor. We also did the line striping.